high precision cnc milling machine center

Operation High Precision CNC Milling Machine Center should pay more attention to the four major issues. HiGH Precision CNC Milling Machine Center is safe and convenient to maintain the life of the machine.

Safety operation basic precautions

1. When entering the workshop internship, you need to wear a work clothes.

Note: Do not allow your gloves to operate HIGH Precision CNC Milling Machine Center.

2, Be careful not to move or damage the warning sign installed on the High Precision CNC Milling Machine Center.

3, do not place an obstacle around High Precision Cnc Milling Machine Center. 

4. Do not allow compressed air to clean the High Precision CNC Milling Machine Center. 

Preparation before work

1. Staff must be familiar with the performance, structure, drive principle and control program of High Precision CNC Milling Machine Center, master the function and operational procedures of each operation button, indicator light. Do not perform the operation and adjustment of the machine before you understand the entire operation.

2. Before the opening machine, you need to check if the High Precision CNC Milling Machine Center is normal. 

3.Before processing parts, it is necessary to strictly check if the High Precision CNC Milling Machine Center tool data is normal.

Safety precautions during work

1. When machining parts, the guard door must be closed. The protection door of the High Precision CNC Milling Machine Center is not allowed during processing. 

2. During processing, the operator shall not leave the High Precision CNC Milling Machine Center without authorization. The staff should maintain the high focus of thought and observe the operating state of the machine.

3. It is strictly forbidden to open the CNC system control cabinet for viewing and touch;

4. The operator shall not change the internal parameters of the High Precision CNC Milling Machine Center. 

5. High Precision CNC Milling Machine Center is a large equipment, except for the workstock, in the workbench, it is strictly forbidden to stack any worker, clip, blade, measure, workpiece and other debris. 

Precautions after work

1. Clear chips, wipe the machine, so that the High Precision CNC Milling Machine Center is cleaned with the environment. Parts should be adjusted to normal positions

2, check the state of the lubricant, the coolant, add or replace it in time. Be

3. Turn off the power and total power supply on the HIGH PRECISION CNC Milling Machine Center Conservation panel. 

4, cleaning on-site hygiene, filling in the device using the record.

In the End

Due to the complexity and precision of CNC machining, a small mistake may lead to the complete scrapping of the workpiece, and even damage the expensive spindle, which will seriously damage the life of the equipment. 

Therefore, qualified high precision cnc milling machine center operators must master the daily processing skills.